October 29, 2014

Zone System

The zone system was invented by Ansel Adams - great landscape photographer. 
The camera always tries to mid tone exposure, all the time. It is very useful to carry special cards to set the white balance so that the colours on your photographs will be as natural as they can be, also it's easier to batch process them. 

There are two sources of light
/                                \
/                                   \
reflected light                  light incident
/                                         \
/                                            \
bouncing of                           light falling on
the subject                               the subject


There are eleven zones (indicated using roman numbers):

Zone X - pure white. Specular highlights, glares or light sources in the picture area. Danger of photon well overflow. Rendered as the maximum white value of the paper surface.
 
Zone IX - nearly pure white without texture (must be compared to pure white to tell the difference). Glaring white surfaces, snow in flat sunlight. No detail or significant texture visible. 
 
Zone VIII - Almost white (not blank whites). Textured snow in sun, reflected highlights on Caucasian skin. Delicate texture and some gradation exist, but no detail. 
 
Zone VII - Off white or bright light grey. White texture, very light skin, slver hair, weathered white paint, snow with acute side lighting. Highest Zone that will still hold good details. 
 
Zone VI - Rich mid - tone grey. Caucasian skin in sunlight, light stone and sand, shadows in snow in brightly sunlight snowscapes. Sharp fine detail visible. 
 
Zone V - Middle grey. Standard Kodak 18% grey reflectance card. Clear northern sky (panchromatic rendering), dark skin, grey stone, average weathered wood. Excellent detail visible. 
 
Zone IV - Medium - dark grey. Average dark green foliage, shadow side of skin, dark stone, landscape shadow. Details plainly visible. This where you want to place the shadow side of Caucasian portraits in sunlight. 
 
Zone III - Very dark grey. Dark textured bark on shadow side of tree. Average dark materials. Good texture and detail can be seen. This is where you will wan to place shadow details. 
 
Zone II - Dark grey -black. First suggestion of texture. Very dark details in shadows. Deep tonalities, representing the darkest part of the image in which some slight detail is required. 
 
Zone I - Near black, no detail. Effective threshold. First step above complete black in the print. Slight tonality, no texture. 
 
Zone 0 - Total black. Complete lack of density, other than dark current noise (or film base density + fog in the case of a film negative). Should appear as total black in the print. 



It is helpful to understand and read the zones because it can help visualise how the image will print and it might make it easier to make a perfect exposure.