October 29, 2014

Zone System

The zone system was invented by Ansel Adams - great landscape photographer. 
The camera always tries to mid tone exposure, all the time. It is very useful to carry special cards to set the white balance so that the colours on your photographs will be as natural as they can be, also it's easier to batch process them. 

There are two sources of light
/                                \
/                                   \
reflected light                  light incident
/                                         \
/                                            \
bouncing of                           light falling on
the subject                               the subject


There are eleven zones (indicated using roman numbers):

Zone X - pure white. Specular highlights, glares or light sources in the picture area. Danger of photon well overflow. Rendered as the maximum white value of the paper surface.
 
Zone IX - nearly pure white without texture (must be compared to pure white to tell the difference). Glaring white surfaces, snow in flat sunlight. No detail or significant texture visible. 
 
Zone VIII - Almost white (not blank whites). Textured snow in sun, reflected highlights on Caucasian skin. Delicate texture and some gradation exist, but no detail. 
 
Zone VII - Off white or bright light grey. White texture, very light skin, slver hair, weathered white paint, snow with acute side lighting. Highest Zone that will still hold good details. 
 
Zone VI - Rich mid - tone grey. Caucasian skin in sunlight, light stone and sand, shadows in snow in brightly sunlight snowscapes. Sharp fine detail visible. 
 
Zone V - Middle grey. Standard Kodak 18% grey reflectance card. Clear northern sky (panchromatic rendering), dark skin, grey stone, average weathered wood. Excellent detail visible. 
 
Zone IV - Medium - dark grey. Average dark green foliage, shadow side of skin, dark stone, landscape shadow. Details plainly visible. This where you want to place the shadow side of Caucasian portraits in sunlight. 
 
Zone III - Very dark grey. Dark textured bark on shadow side of tree. Average dark materials. Good texture and detail can be seen. This is where you will wan to place shadow details. 
 
Zone II - Dark grey -black. First suggestion of texture. Very dark details in shadows. Deep tonalities, representing the darkest part of the image in which some slight detail is required. 
 
Zone I - Near black, no detail. Effective threshold. First step above complete black in the print. Slight tonality, no texture. 
 
Zone 0 - Total black. Complete lack of density, other than dark current noise (or film base density + fog in the case of a film negative). Should appear as total black in the print. 



It is helpful to understand and read the zones because it can help visualise how the image will print and it might make it easier to make a perfect exposure. 


Lake in Poland

f/8
1/80sec.
ISO 200

This is a photo I took few years back. It's a sunset in Poland in my childhood city. I have edited it a bit to bring up the contrast. I love this shot as it reminds me of where I come from, the colours, composition and just the whole image is perfect for me. 

October 03, 2014

Buying a Lens

When buying a lens (second handed or new) always make sure that:
  • The lens has no creep - it should be smoothly zooming in and out.
  • You check theoverall condition of the lens.
  • Aperture - does the aperture ring move easily but it's not moving too light? Also look for the range you're interested in.
  • Where it was produced - usually the lenses from Japan are really good quality.
  • Vibration reduction is a bonus.
  • Is it dusty?
  • Does the lens have scratches? If so I would recommend not to buy it because the scratch will leave a mark on every single photo that you take with this lens.
  • Does the lens have fungus inside? To check if it does, tilt the lens slightly and look closely, if it has little 'water droplets' inside that means the lens has fungus.
  • Does the lens have dents on focus ring? Does the focus ring wobble? Don't buy if the answer is a YES to any of these two questions.
  • Also check if it's focusing right. 
  • It's good to check the lens on your camera body.

Lone Walk

f/11
1/400sec.
ISO 200

This is a shot I have taken in Oxford's field outside the city. I found a lonely horse going across the scenery and thought it would make a great photo. I have cropped it to show better the horse and to make better composition.

Christmas Tree Bokeh


f/5.6
1/30sec.
ISO 1600

This is a photo that is completely out of focus to create a bokeh. I have used a Christmas tree to attempt this. I like how the background is not black just navy blue.